Kyosho Minium 'Extra 330SC' Profile PIP Kit

Kyosho Minium 'Extra 330SC' Profile PIP Kit

   
Average Reviews : N/A
Reviews : 0
Write A Review

Email a Friend
Product Inquiry
    
Ready To Order?

Our Price: £69.95

Item in stock!

 


Product Info

Kyosho Minium 'Extra 330SC' Profile PIP (bind-n-fly) Kit

** SPECIAL OFFER FREE DELIVERY UK MAINLAND LIMITED STOCK **

Introducing the new 4-channel micro-sized high-performance aerobatic aeroplane. The same 4-channel control of aileron, elevator, rudder and throttle featured in larger aeroplanes is compacted into the ultra small MINIUM AD series. Now a new level of aerobatic performance is available with the PROFILE EXTRA 330SC! The profile aeroplane specifications provide an ultra lightweight finish and excellent aerodynamics in a slightly larger size than previous MINIUM AD models. You can enjoy the aeroplane's aerobatic flight indoors and outdoors, even in a light breeze. Torque rolls are regarded as a difficult challenge for ultra-small aeroplanes, but the PROFILE EXTRA 330SC executes these with confidence.

This PIP kit includes the RA-20P4 lightweight one-piece control unit incorporating receiver and motor control ESC (max. 2A), three ultra light servos weighing just 1.5g, 8mm geared motor assembly and D135 x P65 prop. This provides an economical route for those who already have an existing Kyosho AD 4ch. KT-20 2.4GHz transmitter or the new KT-20TF (Throttle Free) 2.4GHz transmitter which features full throttle stick control (without return spring).

Specifications:
  • Length: 420mm (16.5in)
  • Wingspan: 405mm (15.9in)
  • Weight: 30g approx. (1.058oz)
  • Motor: 8mm Dia 'Hyper' Motor
  • Propeller: D135×P65mm
  • Dihedral: 0°

    As with all 2.4 GHz MINIUM AD series models, the RC system automatically scans a 75-wave spectrum for open frequencies when it is switched on to provide a stable control system safe from radio interference that allows up to 24 aeroplanes to flown at the same time.

    Fuselage colour scheme is complete. Finish the simple assembly, install the RC system, set the linkages then install your own 3.7V 130mAh - 150mAh LiPo battery. Finally, bind the RC system to your own AD series transmitter. Flight times of about 4 - 5 minutes are achievable depending on conditions.

    Included:
  • Pre-coloured un-assembled kit
  • 8mm motor/gearbox assembly
  • RA-20P4 lightweight one-piece control unit incorporating receiver and motor control ESC (max. 2A)
  • 3 x Ultra Micro servos

    Required to Complete:
  • Foam-friendly glue.

    Required to Operate:
  • Kyosho 2.4GHz KT-20 transmitter (as used with other Minium 4ch. aircraft/heli systems) or the newly developed KT-20 TF 2.4GHz transmitter which features full throttle stick control (without return spring).
  • 3.7V 130mAh-150mAh Lithium Polymer battery
  • 4 x AA size batteries for transmitter

    What is PIP? - PIP (Plug in Play) kits include servos, motor control ESC and also a receiver in some cases. They are packaged to be used with your own transmitter (and receiver where required). PIP kits are generally more economical options for adding 2nd or 3rd models to your collection. Depending on the specifications, the degree of difficulty in completing the model can vary. However, except for some expert-level models, KYOSHO kits can be chosen with total peace of mind as they are produced with no complicated work needed to finish the model.



  • Related Products


    All > Airplanes > Kyosho Aircraft > Kyosho Minium Series
    All > New Products